Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Electronic Steering Column Lock Control Module -J764-, REMOVING AND INSTALLING: Installing
Install in the reverse order of removal, while noting the following:
-- Install the steering column. Refer to STEERING COLUMN, REMOVING AND INSTALLING .
-- Complete the "Control Module, Replacing" program after replacing the Electronic Steering Column Lock Control Module -J764-, using the Vehicle diagnostic tester .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.