Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2025 Audi A4 Quattro Prestige
Quick Lookups: Fluids
2025 Audi A4 Quattro PrestigeSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.80 OZS. | 0.11 L | Denso or Sanden Compressor | Approximate capacity. | S | ||
| Air Cond Refrigerant | 1.15 LBS. | 0.52 KG | R-1234yf | S | |||
| Automatic Transmission Fluid | Initial Fill | 4.60 QTS. | 4.35 L | VOLKSWAGEN Automatic Transmission Fluid G 055 529 A2 | Part numbers are for reference only. Approximate capacity. | S | |
| Automatic Transmission Fluid | Refill | 3.60 QTS. | 3.4 L | VOLKSWAGEN Automatic Transmission Fluid G 055 529 A2 | Part numbers are for reference only. Approximate capacity. | S | |
| Brake Fluid | 1.10 QTS. | 1.04 L | Part No. B 000 750 M3. Part numbers are for reference only. Approximate capacity. | S | |||
| Engine Coolant | 10.50 QTS. | 9.93 L | Part No. G A13 A8J M1. Part numbers are for reference only. Approximate capacity. | S | |||
| Engine Oil | 5.50 QTS. | 5.2 L | AUDI High Performance Genuine Engine Oil SAE 0W-20. VW 508 00 | Approximate capacity. | S | ||
| Windshield Washer Fluid | 5.10 QTS. | 4.82 L | Part No. 8X0 096 320 Part numbers are for reference only. Approximate capacity. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.