Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2025A4 QUATTRO PRESTIGEREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONBRAKESMAP - ROUTINE INSPECTION REFERENCE GUIDEROUTINE INSPECTION REFERENCE GUIDEROUTINE INSPECTION - UICSSTEERING AND SUSPENSION, WHEEL ALIGNMENT, WHEELS AND TIRESSTRUT RODS
2025 Audi A4 Quattro Prestige
Strut Rods
2025 Audi A4 Quattro PrestigeSECTION Strut Rods
| Condition | Code | Procedure |
|---|---|---|
| Adjusting nut seized | A | Require repair or replacement of hardware |
|
NOTE:
Only required if an alignment is being performed and adjustment of the strut in question is required.
|
||
| Attaching (mating) hole oversized | A | Require repair or replacement of bracket or frame |
| Attaching hardware broken | A | Require repair or replacement of hardware |
| Attaching hardware missing | C | Require replacement of hardware |
| Attaching hardware not functioning | A | Require repair or replacement of hardware |
| Attaching hardware threads damaged | A | Require repair or replacement of hardware |
| Attaching hardware threads stripped (threads missing) | A | Require replacement of hardware |
| Attaching point on bracket or frame corroded, affecting structural integrity | A | Require repair of bracket or frame |
| Bent, affecting performance | A | Require replacement |
| Mating (attaching) hole oversized | A | Require repair or replacement of bracket or frame |
| Threads damaged | A | Require repair or replacement |
| Threads stripped (threads missing) | A | Require replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.