Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012S4 QUATTRO SEDAN (8K2) V6-3.0L SC (CCBA)REPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTENTERTAINMENT SYSTEMSENTERTAINMENT SYSTEM CONTROL MODULESERVICE AND REPAIRFRONT INFORMATION DISPLAY CONTROL HEAD (J685) (DISPLAY)
2012 Audi S4 Quattro Sedan (8K2) V6-3.0L SC (CCBA)
Front Information Display Control Head (J685) (Display)
2012 Audi S4 Quattro Sedan (8K2) V6-3.0L SC (CCBA)SECTION Front Information Display Control Head (J685) (Display)
Front Information Display Control Head (J685) (Display)
The display is located in the center of the instrument panel.
- Turn off all electrical consumers.
- Remove the key.
Removing
- Remove the MMI screen cover.
- Remove the screws - arrows - from the display - 1 -.
- Remove the display - 1 - from the instrument panel - 2 -.
- Unlock and disconnect the connectors from the display.
Installing
- Install in reverse order of removal.
Tightening specifications, refer to => [ Radio Component Locations Overview ] Radio Component Locations Overview.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.