Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A3 (8PA) L4-2.0L TURBO (CCTA)REPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSWINDOW TRACKSERVICE AND REPAIRREAR DOOR WINDOW GUIDE
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)
Rear Door Window Guide
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)SECTION Rear Door Window Guide
Window Guide
1 Window Frame
• Removed => [ Window Frame ] Rear Door Components
2 Inner Window Recess Seal
• Door trim removed.
3 Window Guide
• Seal must not be installed by knocking it on, rather seal must be pressed in.
• Use soapy water to assist assembly of seal.
• Slide onto window frame from side.
• Use soap solution to assist assembly.
• Securing piece must engage audibly into corners - arrows -, adhere further if necessary
4 Inner Door Seal
5 Door Window
6 Door Trim
• Removed
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.