Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A3 (8PA) L4-2.0L TURBO (CCTA)REPAIR AND DIAGNOSISSTARTING AND CHARGINGCHARGING SYSTEMALTERNATORSERVICE AND REPAIRVALEO GENERATOR OVERVIEW, THROUGH 2000
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)
Valeo Generator Overview, Through 2000
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)SECTION Valeo Generator Overview, Through 2000
Valeo Generator Overview, through 2000
1 Generator
2 Voltage Regulator
• Removing:
- Remove the nuts - item 5 - and cover - item 4 -.
- Remove the bolt - item 6 - and nuts - item 7 - and remove the voltage regulator.
• Carbon brush wear limit: 5 mm
3 Protective Cap
4 Cover
5 Nut
• 2 Nm
6 Screw
• 2 Nm
7 Nut
• 3.5 Nm
• Quantity 2
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.