Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A3 (8PA) L4-2.0L TURBO (CCTA)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEOIL PAN, ENGINE
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)
Oil Pan, Engine
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)SECTION Oil Pan, Engine
Fastener Tightening Specifications
Lower Oil Pan - Tightening Sequence
- Tighten bolts in 3 stages in - 1 to 20 - sequence as follows:
Upper Oil Pan - Tightening Sequence
- Tighten bolts in 3 stages in - 1 to 14 - sequence as follows:
• There may be 13 bolts installed, depending on the version.
Oil Separator Tightening Sequence
- Tighten the bolts to 9 Nm in the following sequence: - 1 to 9 -.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.