Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A3 (8PA) L4-2.0L TURBO (CCTA)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSVARIABLE VALVE TIMING ACTUATORSERVICE AND REPAIR
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)
Variable Valve Timing Actuator: Service and Repair
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)SECTION Service and Repair
Camshaft Adjustment Valve 1 (N205)
Removing
- Disconnect the connector from the camshaft adjustment valve 1 - 1 -.
- Remove the bolts - arrows - and then the camshaft adjustment valve 1.
Installing
• Tightening specification, refer to => [ Timing Chains Guard, Camshaft Adjustment Valve 1 (N205) Overview ] Timing Chains Guard, Camshaft Adjustment Valve 1 (N205) Overview
Install in reverse order of removal. Note the following:
• Replace the O-ring.
- Coat the seal and the O-ring with engine oil.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.