Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A3 (8PA) L4-2.0L TURBO (CCTA)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSSERVICE PRECAUTIONSSAFETY PRECAUTIONSTEST DRIVES WITH THE USE OF TESTING AND MEASURING DEVICES
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)
Test Drives With the Use of Testing and Measuring Devices
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)SECTION Test Drives With the Use of Testing and Measuring Devices
Test Drives with the use of Testing and Measuring Devices
If testing equipment must be used during a road test, observe the following:
Distraction and testing equipment that is not secured properly can cause accidents.
The passenger airbag could pose a risk if it deploys in a collision.
• Operating testing equipment while driving causes it to shift position.
• There is an increased risk of injury due to unsecured testing equipment.
• Always secure testing equipment on the rear seat using a strap and have a second person in the rear seat to operate it.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.