Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A3 (8PA) L4-2.0L TURBO (CCTA)REPAIR AND DIAGNOSISMAINTENANCETIMING COMPONENT ALIGNMENT MARKSLOCATIONS
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)
Timing Component Alignment Marks: Locations
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)SECTION Locations
Camshaft Timing Chain
- Rotate the vibration damper using the (T10355) into the Top Dead Center (TDC) position.
- Turn the exhaust camshaft with the wrench in the direction of the - arrow 1 - and slide the camshaft locating tool (T40271/1) in the chain sprocket splines in the direction of the - arrow 2 -.
- Remove the upper guide track - 1 - by unlocking the latch with a screwdriver and pushing the guide track forward.
- Remove the timing chain.
Installing
• Tightening specifications, refer to => [ Camshaft Timing Chain Overview ] Camshaft Timing Chain Overview.
• The painted links of the timing chain must be positioned on the markings on the chain sprockets.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.