Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A3 (8PA) L4-2.0L TURBO (CCTA)REPAIR AND DIAGNOSISMAINTENANCESERVICE REMINDER INDICATORSMAINTENANCE REQUIRED LAMP/INDICATORSERVICE AND REPAIRSERVICE INTERVAL DISPLAY, RESETTINGWITHOUT SCAN TOOL
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)
Without Scan Tool
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)SECTION Without Scan Tool
Service display, resetting after service without VAS 5051/5052
Note: It is no longer possible to reset the service display without VAS5051/5052 on vehicles from model year 2008
If the service display is reset manually via the instrument cluster, it automatically sets itself to fixed interval
- Switch on ignition.
- When button 1 is pulled, the message "SERVICE" will be displayed
- Pull button again for 5 seconds until the message "SERVICE IN .... KM... DAYS appears."
- The service indicator is reset.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.