Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A3 (8PA) L4-2.0L TURBO (CCTA)REPAIR AND DIAGNOSISDIAGRAMSCONNECTOR VIEWSMULTIPLE JUNCTION CONNECTOR
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)
Multiple Junction Connector
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)SECTION Multiple Junction Connector
Right Door Cut-Off Connector, Disconnecting
Procedure
- Press dust protection boot - 1 - at marking - arrow - and pull off.
- Release door cut-off connector - 1 - and remove outward - arrow -, press securing guide - 2 - to do so.
- Make sure, connector engages audibly at connection.
- Press on dust protection boot until it engages audibly.
• Check whether rubber lips on protective boot evenly contact A-pillar all around.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.