Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A3 (8PA) L4-2.0L TURBO (CCTA)REPAIR AND DIAGNOSISCRUISE CONTROLDESCRIPTION AND OPERATIONCRUISE CONTROL, VEHICLES WITH ELECTRONIC POWER CONTROL
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)
Cruise Control, Vehicles With Electronic Power Control
2012 Audi A3 (8PA) L4-2.0L Turbo (CCTA)SECTION Cruise Control, Vehicles With Electronic Power Control
Cruise Control, Vehicles With Electronic Power Control
• The function of the Cruise Control System (CCS) is controlled by the Engine Control Module on vehicles with Electronic Power Control (EPC).
• Malfunctions in relation to CCS are sent via the Engine Control Module (ECM).
- For trouble shooting, use the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.