Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2011Q5 QUATTRO (8RB) V6-3.2L (CALB)REPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAUTOMATIC TRANSMISSION/TRANSAXLECONTROL MODULETECHNICAL SERVICE BULLETINSRECALLSCAMPAIGN 37F5 - TCM UPDATE FOR IMPROVED SHIFTING
2011 Audi Q5 Quattro (8RB) V6-3.2L (CALB)
Campaign 37F5 - TCM Update For Improved Shifting
2011 Audi Q5 Quattro (8RB) V6-3.2L (CALB)SECTION Campaign 37F5 - TCM Update For Improved Shifting
RVU - A4, A5 and Q5 shift quality update (37F5)
37 11 17
2024706/2
January 26, 2011.
Supersedes Technical Service Bulletin Group 37 number 10 - 13 dated October 28, 2010 for reasons listed below.
AFFECTED VEHICLES
CONDITION
This Required Vehicle Update (RVU) has been proactively released to improve the quality of certain 2011 model year vehicles.
On Audi A4, A5, A5 Cabriolet and Q5 vehicles with 0B6 or 0BK transmissions manufactured within a specific period, the transmission control unit (address word 02) software must be updated for improved shift quality.
This RVU is in effect until January 31, 2014. After that date, this RVU will expire and no longer be in effect.
Vehicle must meet all of the following criteria:
^ Procedure is valid only for vehicles that show the 37F5 code in the ElsaWeb Campaign/Action Information screen on the day of repair.
^ Vehicle must be within the Limited New Vehicle Warranty.
^ Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin.
^ Procedure must be performed on applicable vehicles in dealer inventory prior to sale.
TECHNICAL BACKGROUND
PRODUCTION SOLUTION
Optimized transmission control unit software for improved shift quality.
SERVICE
1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.
2. Update the gearbox control module using the SVM action code as listed in the table above if necessary.
Tip: Only the gearbox control module is updated as part of this RVU. Do not perform any updates of other control modules.
WARRANTY INFORMATION
ADDITIONAL INFORMATION
All parts and service references provided in this RVU are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.
ATTACHMENT
00 Software Version Management (SVM), Operating Instructions
37 11 17
2024706/2
January 26, 2011.
Supersedes Technical Service Bulletin Group 37 number 10 - 13 dated October 28, 2010 for reasons listed below.
AFFECTED VEHICLES
CONDITION
This Required Vehicle Update (RVU) has been proactively released to improve the quality of certain 2011 model year vehicles.
On Audi A4, A5, A5 Cabriolet and Q5 vehicles with 0B6 or 0BK transmissions manufactured within a specific period, the transmission control unit (address word 02) software must be updated for improved shift quality.
This RVU is in effect until January 31, 2014. After that date, this RVU will expire and no longer be in effect.
Vehicle must meet all of the following criteria:
^ Procedure is valid only for vehicles that show the 37F5 code in the ElsaWeb Campaign/Action Information screen on the day of repair.
^ Vehicle must be within the Limited New Vehicle Warranty.
^ Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin.
^ Procedure must be performed on applicable vehicles in dealer inventory prior to sale.
TECHNICAL BACKGROUND
PRODUCTION SOLUTION
Optimized transmission control unit software for improved shift quality.
SERVICE
1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.
2. Update the gearbox control module using the SVM action code as listed in the table above if necessary.
Tip: Only the gearbox control module is updated as part of this RVU. Do not perform any updates of other control modules.
WARRANTY INFORMATION
ADDITIONAL INFORMATION
All parts and service references provided in this RVU are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.
ATTACHMENT
00 Software Version Management (SVM), Operating Instructions
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.