Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2011Q5 QUATTRO (8RB) V6-3.2L (CALB)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINETIMING COVER
2011 Audi Q5 Quattro (8RB) V6-3.2L (CALB)
Timing Cover
2011 Audi Q5 Quattro (8RB) V6-3.2L (CALB)SECTION Timing Cover
Left Timing Chain Cover, Tightening Specifications and Sequence
Tighten bolts in 2 stages in sequence - 1 through 8 - as follows;
Tighten to 5 Nm
Tighten an additional 90°
Replace the bolts for the left timing chain cover.
Right Timing Chain Cover, Tightening Specifications and Sequence
Tighten bolts in 2 stages in sequence - 1 through 8 - as follows;
Tighten to 5 Nm
Tighten an additional 90°
Replace the bolts for the right timing chain cover.
Lower Timing Chain Cover, Tightening Specifications and Sequence
Tighten bolts in 6 stages as follows:
Tighten the bolts - arrows - and tighten them to 5 Nm
Tighten the bolts - 1 through 10 - diagonally to 9 Nm
Tighten bolts - arrows - to 9 Nm
Tighten the bolts - 8, 9 and 10 - to 22 Nm
Tighten the bolt - 3 - to 16 Nm
Tighten the bolt - 6 - to 70 Nm
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.