Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2011Q5 QUATTRO (8RB) V6-3.2L (CALB)REPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - BODY AND FRAMEPOWER SEAT CONTROL MODULESERVICE AND REPAIRPOWER STANDARD FRONT SEAT, WITH OR WITHOUT MEMORYMEMORY SEAT/STEERING COLUMN ADJUSTMENT CONTROL MODULE OVERVIEW
2011 Audi Q5 Quattro (8RB) V6-3.2L (CALB)
Memory Seat/Steering Column Adjustment Control Module Overview
2011 Audi Q5 Quattro (8RB) V6-3.2L (CALB)SECTION Memory Seat/Steering Column Adjustment Control Module Overview
Memory Seat/Steering Column Adjustment Control Module Overview
1 Front Seat
2 Pin
• For securing the bracket to the seat pan.
3 Bracket
• Removing and installing, refer to => [ Memory Seat/Steering Column Adjustment Control Module Bracket ] Memory Seat/Steering Column Adjustment Control Module Bracket.
• Engaged and clipped in the seat pan.
4 Memory Seat/Steering Column Adjustment Control Head
• Driver side: memory seat/steering column adjustment control module (J136).
• Front passenger side: passenger memory seat control module (J521).
• Vehicles equipped with a comfort seat on the driver side: integrated left front seat ventilation control module (J800).
• Vehicles equipped with a comfort seat on the front passenger side: integrated right front seat ventilation control module (J799).
• Clipped with the bracket.
• Removing and installing, refer to => [ Memory Seat/Steering Column Adjustment Control Module ] Memory Seat/Steering Column Adjustment Control Module.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.