Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2011Q5 QUATTRO (8RB) V6-3.2L (CALB)REPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYDIAGRAMS
2011 Audi Q5 Quattro (8RB) V6-3.2L (CALB)
Keyless Entry: Diagrams
2011 Audi Q5 Quattro (8RB) V6-3.2L (CALB)SECTION Diagrams
Access/Start Authorization Switch, Connector Assignment
Connector Mount
3 Not used
4 Not used
5 S-contact
6 Terminal 15
7 LIN
8 Terminal 30
9 Not used
10 Not used
11 Not used
12 Not used
13 RED2, terminal 15
14 RED, terminal 15
15 ZAS+
16 Terminal 31
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.