Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2011Q5 QUATTRO (8RB) V6-3.2L (CALB)REPAIR AND DIAGNOSISBODY AND FRAMEFENDERFRONT FENDERSERVICE AND REPAIRFENDER ASSEMBLY OVERVIEW
2011 Audi Q5 Quattro (8RB) V6-3.2L (CALB)
Fender Assembly Overview
2011 Audi Q5 Quattro (8RB) V6-3.2L (CALB)SECTION Fender Assembly Overview
Fender Assembly Overview
1 Fender
• Removing
- Remove the drip railing. Refer to Water Deflector, Removing => [ Water Deflector, Removing ] Windshield Assembly Overview.
- Remove plenum chamber cover. Refer to => [ Plenum Chamber Cover ] Plenum Chamber Cover.
- Remove front bumper.
- Remove headlight.
- Remove wheel housing liner. Refer to => [ Front Wheel Housing Liner ] Service and Repair.
- End plate, removing
- Remove the bolts - 2 - and - 4 - and nuts - 7 - and the fender.
• Installing
Installation is reverse of removal.
2 Bolt
• 8 Nm
3 Bolt
• 8 Nm
4 Bolt
• 8 Nm
5 Bolt
• 8 Nm
6 Nut
• 4 Nm
7 Fender Mount
8 Brace
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.