Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2006A4 QUATTRO SEDAN (8EC) V6-3.2L (BKH)REPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSTRANSFER CASESYSTEM SPECIFICATIONS
2006 Audi A4 Quattro Sedan (8EC) V6-3.2L (BKH)
System Specifications
2006 Audi A4 Quattro Sedan (8EC) V6-3.2L (BKH)SECTION System Specifications
Planetary gearbox
Capacity 9.8 liters
Type Shell ATF M-1375.4
VW Part no. G 055 005 A2 (1.0 ltr)
Lifetime fill no change required
Caution: Only ATF available as a replacement part for automatic transmission 09L may be used in planetary transmission.
Other oils can cause malfunctions or transmission failure
Front final drive
Inital filling 1.1 liters
Type SAE 75W-90 Synthetic Gear Oil
VW Part no. G 052 145 A1 (0.5 ltr)
VW Part no. G 052 145 S2 (1.0 ltr)
Lifetime fill no change required
Transfer gear
Inital filling 0.55 liters
Type SAE 75W-90 Synthetic Gear Oil
VW Part no. G 052 145 A1 (0.5 ltr)
VW Part no. G 052 145 S2 (1.0 ltr)
Lifetime fill no change required
Rear final drive (01R)
Capacity 1.5 liters
Type SAE 75W-90 Synthetic Gear Oil
VW Part no. G 052 145 A1 (0.5 ltr)
VW Part no. G 052 145 S2 (1.0 ltr)
Lifetime fill no change required
Rear final drive (0AR)
Capacity 0.9 liters
Type SAE 75W-90 Synthetic Gear Oil
VW Part no. G 052 145 A1 (0.5 ltr)
VW Part no. G 052 145 S2 (1.0 ltr)
Lifetime fill no change required
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.