Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2006A4 QUATTRO SEDAN (8EC) V6-3.2L (BKH)REPAIR AND DIAGNOSISBODY AND FRAMESEATSSERVICE AND REPAIRREMOVAL AND REPLACEMENTPOWER FRONT MEMORY SEATSCONTROL MODULE
2006 Audi A4 Quattro Sedan (8EC) V6-3.2L (BKH)
Control Module
2006 Audi A4 Quattro Sedan (8EC) V6-3.2L (BKH)SECTION Control Module
Control Module
• The control module for power seat with memory is located beneath the driver's seat.
• With malfunctioning control module, the upper frame of seat pan with backrest must be removed:
- Remove seat. Refer to => [ Seat ] Seat.
- Remove bolts - 2 - (Qty. 2). Tightening specification 1.5 Nm.
- Turn control module - 1 - around.
- Disengage retaining bracket - 4 - and disconnect connector - 5 -.
- Press in catches - 3 - (Qty. 2) and disconnect connector - 2 -.
- Remove control module - 1 -.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.