Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2006A4 QUATTRO SEDAN (8EC) V6-3.2L (BKH)REPAIR AND DIAGNOSISBODY AND FRAMESEATSMEMORY POSITIONING SYSTEMSMEMORY POSITIONING SWITCHSERVICE AND REPAIR
2006 Audi A4 Quattro Sedan (8EC) V6-3.2L (BKH)
Memory Positioning Switch: Service and Repair
2006 Audi A4 Quattro Sedan (8EC) V6-3.2L (BKH)SECTION Service and Repair
Drivers Seat Memory Program Control E97 , Removing And Installing
Special tools, testers and auxiliary items required
- Removal wedge 3409
Removing
- Remove switch - 1 - using removal wedge 3409 as illustrated.
- Disconnect electrical connection.
- Use small screwdriver to carefully release fasteners - arrows - .
- Remove switch - 1 - from mounting - 2 - .
Installing
Install in reverse order of removal, noting the following:
- Press switch into switch mounting until fasteners engage.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.