Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA1999NSX V6-3.2L DOHC (VTEC)REPAIR AND DIAGNOSISLIGHTING AND HORNSINTERIOR LIGHTING MODULEDESCRIPTION AND OPERATION
1999 Acura NSX V6-3.2L DOHC (VTEC)
Interior Lighting Module: Description and Operation
1999 Acura NSX V6-3.2L DOHC (VTEC)SECTION Description and Operation
How the Circuit Works
Battery voltage is applied at all times through fuse 34 to the foot well light and the entry light timer circuit in the integrated control unit. When you open the driver's door, its door switch closes and grounds the door switch input of the entry light timer circuit. The timer circuit then turns on the foot well light. The timer circuit keeps the lights on for several seconds after you close the door (driver's door switch opens).
Battery voltage is applied at all times through fuse 34 to the foot well light and the entry light timer circuit in the integrated control unit. When you open the driver's door, its door switch closes and grounds the door switch input of the entry light timer circuit. The timer circuit then turns on the foot well light. The timer circuit keeps the lights on for several seconds after you close the door (driver's door switch opens).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.