🔋Battery Location

Volvo 240 Battery Location

Find where the battery is located on your Volvo 240. Covers all model years with jump start points and replacement tips.

Quick Answer

The Volvo 240 battery is located in the engine bay on most models. Some years may have the battery in the trunk or under the rear seat — see the year-by-year breakdown below.

1988-1993

1988-1993
Battery LocationEngine bay
Battery Group SizeVaries by vehicle — check owner's manual or battery label for correct group size
CCA (Cold Cranking Amps)500 - 700 CCA recommended
Battery TypeStandard flooded or AGM
Notes
  • Disconnect the negative terminal first when removing, reconnect it last when installing
  • Clean battery terminals with a wire brush and apply dielectric grease to prevent corrosion

1982-1987

1982-1987
Battery LocationEngine bay
Battery Group SizeVaries by vehicle — check owner's manual or battery label for correct group size
CCA (Cold Cranking Amps)500 - 700 CCA recommended
Battery TypeStandard flooded or AGM
Notes
  • Disconnect the negative terminal first when removing, reconnect it last when installing
  • Clean battery terminals with a wire brush and apply dielectric grease to prevent corrosion

Frequently Asked Questions

Where is the battery on a Volvo 240?
On most Volvo 240 models, the battery is in the engine bay. Some European-influenced designs and certain model years place it in the trunk or under the rear seat for better weight distribution. Check your specific year below.
What size battery does a Volvo 240 need?
The Volvo 240 battery group size varies by engine and model year — check your owner's manual or the label on your current battery. CCA requirements range from 500-700. Vehicles with start-stop systems require an AGM battery.
How long does a Volvo 240 battery last?
A Volvo 240 battery typically lasts 3-5 years. In hot climates like Texas and the Southwest, expect closer to 3 years. AGM batteries in start-stop equipped models may last 4-6 years.
Can I replace the Volvo 240 battery myself?
Yes, battery replacement is a straightforward DIY job on most Volvo 240 models. You'll need a 10mm wrench for the terminals and possibly a 12mm or 13mm for the hold-down bracket. Some newer models may need a battery registration scan with an OBD2 tool.

Volvo 240 Repair Guides

Need a full step-by-step repair guide?

Start Free AI Diagnosis →

100% Free — No signup required