Saturn Relay Oil Type & Capacity

Frequently Asked Questions

What type of oil does a Saturn Relay use?

Most newer Saturn Relay models (2010+) use 0W-20 full synthetic oil. Older models typically use 5W-30. The exact specification depends on your engine — check the oil cap or owner's manual for the definitive answer.

How many quarts of oil does a Saturn Relay take?

Oil capacity for the Saturn Relay varies by engine — four-cylinder engines typically take 4-5 quarts, V6 engines 5-6 quarts, and V8 or truck engines can take 7-8+ quarts (all with filter). Check your owner's manual for the exact amount.

Can I use conventional oil in my Saturn Relay?

For 2010+ Saturn Relay models, full synthetic is strongly recommended (and often required). Older models can typically use conventional, but synthetic provides better protection, longer drain intervals, and improved fuel economy.

How often should I change the oil in my Saturn Relay?

Modern Saturn Relay models typically call for oil changes every 5,000 - 10,000 miles depending on driving conditions. Older models should stick to 3,000 - 5,000 miles. Severe driving (towing, extreme heat, short trips) may require more frequent changes.

What happens if I use the wrong oil in my Saturn Relay?

Using oil that's too thick can reduce fuel economy and increase engine wear during cold starts. Oil that's too thin may not protect adequately under load. For best results, always use the manufacturer-specified weight.