💡Headlight Bulb Size

Plymouth Fury Headlight Bulb Size

Find the correct headlight bulb size for your Plymouth Fury. Covers low beam, high beam, fog lights, and turn signals for all years.

Quick Answer

The Plymouth Fury headlight bulb size depends on the model year and trim. Common sizes include H11 (low beam), 9005/HB3 (high beam), and H16 (fog lights) — see the full breakdown below.

1984-1989

1984-1989
Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
  • Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
  • Replace bulbs in pairs — if one side burned out, the other is likely near end of life

1978-1983

1978-1983
Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
  • Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
  • Replace bulbs in pairs — if one side burned out, the other is likely near end of life

1972-1977

1972-1977
Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
  • Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
  • Replace bulbs in pairs — if one side burned out, the other is likely near end of life

1966-1971

1966-1971
Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
  • Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
  • Replace bulbs in pairs — if one side burned out, the other is likely near end of life

1960-1965

1960-1965
Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
  • Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
  • Replace bulbs in pairs — if one side burned out, the other is likely near end of life

1956-1959

1956-1959
Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
  • Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
  • Replace bulbs in pairs — if one side burned out, the other is likely near end of life

Frequently Asked Questions

What size headlight bulb does a Plymouth Fury use?
The Plymouth Fury headlight bulb size varies by year. Newer models often use factory LED units, while older models use H11, H7, or 9006 halogen bulbs. Check the year-specific specs below for your exact fitment.
Can I put LED bulbs in my Plymouth Fury?
If your Plymouth Fury has halogen headlights, you can install LED replacement bulbs. Look for bulbs with a proper beam pattern (projector-compatible) to avoid blinding other drivers. Some models may need anti-flicker adapters.
How do I replace the headlight bulb on a Plymouth Fury?
On most Plymouth Fury models, you can access the headlight bulb from behind the headlight assembly in the engine bay. Twist the bulb socket counterclockwise, pull out the old bulb, insert the new one (don't touch the glass), and twist back in.
Why does my Plymouth Fury headlight keep burning out?
Frequent bulb burnout on the Plymouth Fury is usually caused by a loose connection, moisture in the housing, touching the bulb glass during installation, or a voltage regulator issue. Check the connector and housing seal.

Plymouth Fury Repair Guides

Need a full step-by-step repair guide?

Start Free AI Diagnosis →

100% Free — No signup required