💡Headlight Bulb Size

Nissan 240SX Headlight Bulb Size

Find the correct headlight bulb size for your Nissan 240SX. Covers low beam, high beam, fog lights, and turn signals for all years.

Quick Answer

The Nissan 240SX headlight bulb size depends on the model year and trim. Common sizes include H11 (low beam), 9005/HB3 (high beam), and H16 (fog lights) — see the full breakdown below.

1993-1998

1993-1998
Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
  • Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
  • Replace bulbs in pairs — if one side burned out, the other is likely near end of life

1989-1992

1989-1992
Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
  • Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
  • Replace bulbs in pairs — if one side burned out, the other is likely near end of life

Frequently Asked Questions

What size headlight bulb does a Nissan 240SX use?
The Nissan 240SX headlight bulb size varies by year. Newer models often use factory LED units, while older models use H11, H7, or 9006 halogen bulbs. Check the year-specific specs below for your exact fitment.
Can I put LED bulbs in my Nissan 240SX?
If your Nissan 240SX has halogen headlights, you can install LED replacement bulbs. Look for bulbs with a proper beam pattern (projector-compatible) to avoid blinding other drivers. Some models may need anti-flicker adapters.
How do I replace the headlight bulb on a Nissan 240SX?
On most Nissan 240SX models, you can access the headlight bulb from behind the headlight assembly in the engine bay. Twist the bulb socket counterclockwise, pull out the old bulb, insert the new one (don't touch the glass), and twist back in.
Why does my Nissan 240SX headlight keep burning out?
Frequent bulb burnout on the Nissan 240SX is usually caused by a loose connection, moisture in the housing, touching the bulb glass during installation, or a voltage regulator issue. Check the connector and housing seal.

Nissan 240SX Repair Guides

Need a full step-by-step repair guide?

Start Free AI Diagnosis →

100% Free — No signup required