⚙️Transmission Fluid
Mercury Mountaineer Transmission Fluid
Find the correct transmission fluid type and capacity for your Mercury Mountaineer. Covers automatic and manual transmissions for all years.
Quick Answer
The Mercury Mountaineer transmission fluid type depends on your transmission — automatic models typically use ATF WS, Dexron, or manufacturer-specific fluid. Manual transmissions use gear oil. See the year breakdown below.
2005-2010
2005-2010Automatic Fluid TypeDexron III/VI or manufacturer-specific ATF
Auto Drain & Fill3.0 - 4.0 quarts
Auto Total Capacity7.0 - 12.0 quarts
Manual Fluid Type75W-90 gear oil
Manual Capacity2.0 - 3.0 quarts
Change Interval30,000 - 60,000 miles
Notes
- →Use ONLY the manufacturer-specified fluid — wrong ATF can damage the transmission
- →Check transmission fluid level with engine running and at operating temperature
- →Dark, burnt-smelling fluid indicates overheating — change immediately
1999-2004
1999-2004Automatic Fluid TypeDexron III/VI or manufacturer-specific ATF
Auto Drain & Fill3.0 - 4.0 quarts
Auto Total Capacity7.0 - 12.0 quarts
Manual Fluid Type75W-90 gear oil
Manual Capacity2.0 - 3.0 quarts
Change Interval30,000 - 60,000 miles
Notes
- →Use ONLY the manufacturer-specified fluid — wrong ATF can damage the transmission
- →Check transmission fluid level with engine running and at operating temperature
- →Dark, burnt-smelling fluid indicates overheating — change immediately
1997-1998
1997-1998Automatic Fluid TypeDexron III/VI or manufacturer-specific ATF
Auto Drain & Fill3.0 - 4.0 quarts
Auto Total Capacity7.0 - 12.0 quarts
Manual Fluid Type75W-90 gear oil
Manual Capacity2.0 - 3.0 quarts
Change Interval30,000 - 60,000 miles
Notes
- →Use ONLY the manufacturer-specified fluid — wrong ATF can damage the transmission
- →Check transmission fluid level with engine running and at operating temperature
- →Dark, burnt-smelling fluid indicates overheating — change immediately
Frequently Asked Questions
- What transmission fluid does a Mercury Mountaineer use?
- The Mercury Mountaineer transmission fluid type depends on the year and transmission. Automatic transmissions use ATF WS, Dexron VI, or manufacturer-specific fluid. Manual transmissions use 75W-90 gear oil. See below for your specific year.
- How much transmission fluid does a Mercury Mountaineer take?
- A drain-and-fill on the Mercury Mountaineer automatic transmission typically takes 3.5-4.0 quarts. The total system capacity is 7-12 quarts. For a complete fluid exchange, you'll need the full capacity amount.
- How often should I change transmission fluid in my Mercury Mountaineer?
- Change your Mercury Mountaineer automatic transmission fluid every 60,000-100,000 miles under normal conditions. For severe duty (towing, mountain driving, hot climates), change every 30,000-60,000 miles.
- Does the Mercury Mountaineer have a transmission dipstick?
- Many 2010+ Mercury Mountaineer models have sealed transmissions with no dipstick. Fluid level is checked via a fill plug underneath the vehicle. Older models typically have a traditional dipstick under the hood.
More Mercury Mountaineer Guides
🛢️Mercury Mountaineer Oil Type & Capacity🔋Mercury Mountaineer Battery Location🔘Mercury Mountaineer Tire Size⚙️Toyota Camry Transmission Fluid⚙️Toyota Corolla Transmission Fluid⚙️Toyota RAV4 Transmission Fluid⚙️Toyota Highlander Transmission Fluid⚙️Toyota Tacoma Transmission Fluid⚙️Toyota Tundra Transmission Fluid