💡Headlight Bulb Size
Mazda Protege Headlight Bulb Size
Find the correct headlight bulb size for your Mazda Protege. Covers low beam, high beam, fog lights, and turn signals for all years.
Quick Answer
The Mazda Protege headlight bulb size depends on the model year and trim. Common sizes include H11 (low beam), 9005/HB3 (high beam), and H16 (fog lights) — see the full breakdown below.
1998-2003
1998-2003Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1992-1997
1992-1997Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1990-1991
1990-1991Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
Frequently Asked Questions
- What size headlight bulb does a Mazda Protege use?
- The Mazda Protege headlight bulb size varies by year. Newer models often use factory LED units, while older models use H11, H7, or 9006 halogen bulbs. Check the year-specific specs below for your exact fitment.
- Can I put LED bulbs in my Mazda Protege?
- If your Mazda Protege has halogen headlights, you can install LED replacement bulbs. Look for bulbs with a proper beam pattern (projector-compatible) to avoid blinding other drivers. Some models may need anti-flicker adapters.
- How do I replace the headlight bulb on a Mazda Protege?
- On most Mazda Protege models, you can access the headlight bulb from behind the headlight assembly in the engine bay. Twist the bulb socket counterclockwise, pull out the old bulb, insert the new one (don't touch the glass), and twist back in.
- Why does my Mazda Protege headlight keep burning out?
- Frequent bulb burnout on the Mazda Protege is usually caused by a loose connection, moisture in the housing, touching the bulb glass during installation, or a voltage regulator issue. Check the connector and housing seal.
Mazda Protege Repair Guides
More Mazda Protege Guides
Browse all Headlight Bulb Size pages →🔋Mazda Protege Battery Location❄️Mazda Protege Coolant Type🧪Mazda Protege Fluid Capacities🛢️Mazda Protege Oil Type & Capacity⚙️Mazda Protege Serpentine Belt⚡Mazda Protege Spark Plug Type💡Toyota 4Runner Headlight Bulb Size💡Toyota Avalon Headlight Bulb Size💡Toyota Camry Headlight Bulb Size💡Toyota Celica Headlight Bulb Size💡Toyota Corolla Headlight Bulb Size💡Toyota Echo Headlight Bulb Size💡Toyota Highlander Headlight Bulb Size💡Toyota Land Cruiser Headlight Bulb Size💡Toyota Matrix Headlight Bulb Size