Lincoln Navigator Oil Type & Capacity

Frequently Asked Questions

What type of oil does a Lincoln Navigator use?

Most newer Lincoln Navigator models (2010+) use 0W-20 full synthetic oil. Older models typically use 5W-30. The exact specification depends on your engine — check the oil cap or owner's manual for the definitive answer.

How many quarts of oil does a Lincoln Navigator take?

Oil capacity for the Lincoln Navigator ranges from 4.0 to 6.5 quarts depending on engine size and whether you're replacing the filter. Four-cylinder engines are typically on the lower end, V6 and V8 on the higher end.

Can I use conventional oil in my Lincoln Navigator?

For 2010+ Lincoln Navigator models, full synthetic is strongly recommended (and often required). Older models can typically use conventional, but synthetic provides better protection, longer drain intervals, and improved fuel economy.

How often should I change the oil in my Lincoln Navigator?

Modern Lincoln Navigator models typically call for oil changes every 5,000 - 10,000 miles depending on driving conditions. Older models should stick to 3,000 - 5,000 miles. Severe driving (towing, extreme heat, short trips) may require more frequent changes.

What happens if I use the wrong oil in my Lincoln Navigator?

Using oil that's too thick can reduce fuel economy and increase engine wear during cold starts. Oil that's too thin may not protect adequately under load. For best results, always use the manufacturer-specified weight.