What type of coolant does a Ford Bronco2 use?

The Ford Bronco2 coolant type depends on the model year. Newer models use long-life OAT or HOAT coolant (often pink, blue, or orange). Older models use traditional green IAT coolant. Never mix types — check the specs below for your year.

How much coolant does a Ford Bronco2 hold?

The Ford Bronco2 cooling system typically holds 6-10 quarts total. A drain-and-fill replaces about 50-60% of the coolant. For a full system flush, you'll need the complete capacity amount plus extra for bleeding.

Can I mix coolant colors in my Ford Bronco2?

No — mixing different coolant types can cause gel formation, clogged passages, and overheating. If you don't know what's in the system, do a complete flush before adding new coolant. Use only the manufacturer-specified type.

How often should I change coolant in my Ford Bronco2?

Modern Ford Bronco2 models with long-life coolant can go 100,000 miles or 10 years before the first change, then every 50,000 miles. Older models with green coolant need changes every 30,000 miles or 2 years.

❄️Coolant Type

Ford Bronco2 Coolant Type

Find the correct coolant type, color, and capacity for your Ford Bronco2. Covers all years with flush intervals and mixing compatibility.

Quick Answer

The Ford Bronco2 uses manufacturer-specific coolant — typically long-life OAT or HOAT formula. Never mix different coolant types. Check the year breakdown below for your specific coolant color and capacity.

1985-1990

Coolant TypeIAT (traditional green)

Coolant ColorGreen

Total Capacity6.0 - 10.0 quarts

Drain & Fill Volume3.0 - 5.0 quarts

Change Interval30,000 miles or 2 years

Concentration50/50 with distilled water

Notes

→NEVER mix different coolant types or colors — flush completely when changing brands
→Always use distilled water, not tap water, when mixing coolant concentrate
→Check coolant level when engine is COLD — opening the radiator cap when hot causes severe burns

Shop on Amazon →Full Repair Guide →

1984-1984

Coolant TypeIAT (traditional green)

Coolant ColorGreen

Total Capacity6.0 - 10.0 quarts

Drain & Fill Volume3.0 - 5.0 quarts

Change Interval30,000 miles or 2 years

Concentration50/50 with distilled water

Notes

→NEVER mix different coolant types or colors — flush completely when changing brands
→Always use distilled water, not tap water, when mixing coolant concentrate
→Check coolant level when engine is COLD — opening the radiator cap when hot causes severe burns

Shop on Amazon →Full Repair Guide →

Frequently Asked Questions

What type of coolant does a Ford Bronco2 use?: The Ford Bronco2 coolant type depends on the model year. Newer models use long-life OAT or HOAT coolant (often pink, blue, or orange). Older models use traditional green IAT coolant. Never mix types — check the specs below for your year.
How much coolant does a Ford Bronco2 hold?: The Ford Bronco2 cooling system typically holds 6-10 quarts total. A drain-and-fill replaces about 50-60% of the coolant. For a full system flush, you'll need the complete capacity amount plus extra for bleeding.
Can I mix coolant colors in my Ford Bronco2?: No — mixing different coolant types can cause gel formation, clogged passages, and overheating. If you don't know what's in the system, do a complete flush before adding new coolant. Use only the manufacturer-specified type.
How often should I change coolant in my Ford Bronco2?: Modern Ford Bronco2 models with long-life coolant can go 100,000 miles or 10 years before the first change, then every 50,000 miles. Older models with green coolant need changes every 30,000 miles or 2 years.

Ford Bronco2 Repair Guides

→Ford Bronco2 Coolant Flush →Ford Bronco2 Thermostat Replacement →Ford Bronco2 Radiator Replacement

Browse all Ford guides →Browse all Ford Bronco2 guides →

More Ford Bronco2 Guides

Browse all Coolant Type pages →

Need a full step-by-step repair guide?

Start Free AI Diagnosis →

100% Free — No signup required