Reference Value Parameter Identification (PID)/Measured Signal Chart

This is the exact OEM manual section for the path above. Use the breadcrumb to move up or down the tree until you reach the precise year, make, model, and subsystem you need.

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your Ford hyperlink.

AI Repair Guides
Revenue RailIntent: manual

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

More supporting gear

Torque wrench

Use the factory procedure with the right tightening tool.

Manual-based work becomes much easier when you can torque correctly.

Shop on Amazon →

Trim tool set

Useful for clips, covers, and trim pieces called out by the manual.

Most manual procedures assume you have a good trim removal kit.

Shop on Amazon →

Multimeter kit

Great for electrical troubleshooting and manual-tested circuits.

Electrical work in manuals often needs a meter more than another wrench.

Shop on Amazon →
REFERENCE VALUE PARAMETER IDENTIFICATION (PID)/MEASURED SIGNAL CHART

The following listing reflects PIDS and/or measured values which may reveal a possible concern within each system shown. Match the category number with the related PID/measured signal and go to the Typical Diagnostic Reference Value Charts. Typical Diagnostic Reference Values












Some signals can only be measured and require the use of a digital multimeter (DMM).
← Back to Pinout Values and Diagnostic ParametersAll Makes