Auxiliary Heating, Ventilation, and Air Conditioning Control Module Programming and Setup
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your Chevy Truck hyperlink.
Revenue RailIntent: manual
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
Auxiliary Heating, Ventilation, and Air Conditioning Control Module Programming and Setup
Each of the following service procedures may require programming or setup procedures to be performed on the HVAC control module or HVAC actuators.
Auxiliary HVAC Control Module Reprogramming
The Auxiliary HVAC Control Module does not require any programming when it is replaced.
Actuator Replacement
If an actuator is replaced, the following procedure must be performed:
* Re-Calibrating Actuators-Refer to Actuator Recalibration (HVAC - Manual) for the manual system.
* Re-Calibrating Actuators-Refer to Actuator Recalibration (HVAC - Automatic) for the automatic system.