Scan Tool Data Definitions
This is the exact OEM manual section for the path above. Use the breadcrumb to move up or down the tree until you reach the precise year, make, model, and subsystem you need.
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your Chevrolet hyperlink.
Revenue RailIntent: manual
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
More supporting gear
Torque wrench
Use the factory procedure with the right tightening tool.
Manual-based work becomes much easier when you can torque correctly.
Shop on Amazon →Trim tool set
Useful for clips, covers, and trim pieces called out by the manual.
Most manual procedures assume you have a good trim removal kit.
Shop on Amazon →Multimeter kit
Great for electrical troubleshooting and manual-tested circuits.
Electrical work in manuals often needs a meter more than another wrench.
Shop on Amazon →Scan Tool Data Definitions
Battery Voltage Signal
- The scan tool displays the current system battery voltage.
Last Fob Used
- The scan tool indicates the last keyless entry transmitter used to active the keyless entry system.
Fob 1 Programmed
- The scan tool displays whether a keyless entry transmitter is currently programmed into the #1 slot.
Fob 1 Function
- The scan tool indicates the lasted keyless entry function commanded by the keyless entry transmitter programmed to the #1 slot.
Fob 1 Battery
- The scan tool displays the current battery state of the keyless entry transmitter battery as either Low or OK.
Fob 2 Programmed
- The scan tool displays whether a keyless entry transmitter is currently programmed into the #2 slot.
Fob 2 Function
- The scan tool indicates the lasted keyless entry function commanded by the keyless entry transmitter programmed to the #2 slot.
Fob 2 Battery
- The scan tool displays the current battery state of the keyless entry transmitter battery as either Low or OK.
Fob 3 Programmed
- The scan tool displays whether a keyless entry transmitter is currently programmed into the #3 slot.
Fob 3 Function
- The scan tool indicates the lasted keyless entry function commanded by the keyless entry transmitter programmed to the #3 slot.
Fob 3 Battery
- The scan tool displays the current battery state of the keyless entry transmitter battery as either Low or OK.
Fob 4 Programmed
- The scan tool displays whether a keyless entry transmitter is currently programmed into the #4 slot.
Fob 4 Function
- The scan tool indicates the lasted keyless entry function commanded by the keyless entry transmitter programmed to the #4 slot.
Fob 4 Battery
- The scan tool displays the current battery state of the keyless entry transmitter battery as either Low or OK.