Powertrain Control Module Programming and Setup
This is the exact OEM manual section for the path above. Use the breadcrumb to move up or down the tree until you reach the precise year, make, model, and subsystem you need.
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your Chevrolet hyperlink.
Revenue RailIntent: manual
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
More supporting gear
Torque wrench
Use the factory procedure with the right tightening tool.
Manual-based work becomes much easier when you can torque correctly.
Shop on Amazon →Trim tool set
Useful for clips, covers, and trim pieces called out by the manual.
Most manual procedures assume you have a good trim removal kit.
Shop on Amazon →Multimeter kit
Great for electrical troubleshooting and manual-tested circuits.
Electrical work in manuals often needs a meter more than another wrench.
Shop on Amazon →Powertrain Control Module Programming and Setup
The following service procedures require either a programming or a setup event be performed for a complete repair.
Powertrain Control Module (PCM) Replacement
If the powertrain control module (PCM) is replaced, the following procedures must be performed:
1. PCM Reprogramming-Refer to Service Programming System (SPS). Programming and Relearning
2. Crankshaft Position (CKP) Variation Learn-Refer to Crankshaft Position System Variation Learn.
PCM Reprogramming
If the PCM needs to be reprogrammed, refer to Service Programming System (SPS). Programming and Relearning
Setup for Component Replacement
The replacement of some components will require a setup procedure for complete repair.
If any of the following components are replaced, a crankshaft position (CKP) variation learn procedure must be performed. Refer to Crankshaft Position System Variation Learn.
* Engine replacement
* Any engine repair that disturbs the crankshaft position CKP sensor or its relationship with the crankshaft reluctor wheel
* CKP sensor