Engine Control Module: Service and Repair
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your Chevrolet hyperlink.
Revenue RailIntent: manual
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
1. Disconnect battery ground cable.
2. Disconnect two ECM electrical connectors.
3. Remove the ECM mounting hardware.
4. Remove ECM from passenger compartment.
5. Reverse procedure to install.
CAUTION: Replacement ECM is supplied without engine calibration unit (PROM) and care must be taken when removing the PROM from a defective ECM as it will be used in the replacement ECM.