Checking MOST communication
The parameter "MOST locked" indicates whether the MOST network is closed and communication possible.
Bypass the control modules on the MOST network one at a time to check network communication. Proceed as follows:
- Ignition off.
- Disconnect the MOST connector from the relevant control module.
- Connect the MOST cable to special tool: 951 2867 MOST instrumentation 951 2867 MOST instrumentation
- Activate the infotainment system.
- Press the VCT2000 symbol.
Check that the communication on the MOST-net works by reading out the status for the parameter MOST locked for at least 30 seconds.
For further information see: DTC ICM-U1A2400.
Continue - DONE
-------------------------------------------------