Camshaft, Engine
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2004 Volkswagen.
Tighten bearing caps 2 and 4 alternately and diagonally to 20 Nm.
Coat contact surfaces of bearing cap 1 lightly with sealing compound AMV 174 004 01.
Install bearing caps 3, 1 and 5 and also tighten to 20 Nm.
Check radial clearance with Plastigage
Wear limit 0.1 mm
Run-out: max 0.05 mm