Code Control Module (Function 07)
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2000 Volkswagen.
Code Control Module (function 07)
By using the code control module function the radio can be coded as follows:
- VAG1551 scan tool connected ("Radio" address word 56); press -> button to advance program sequence
Coding
- Press buttons -0- and -7- to select function 07 "Code Control Module"..
- Press -Q- button to confirm input.
Indicated on display
Code Control Module
Input code number XXXXX (0-32000)
Radio Coding (non-Monsoon)
- 06401- for vehicles without CD-changer (if CD-changer is installed later, radio code must be changed accordingly)
- 06403- for vehicles with CD-changer
Indicated on display
Code Control Module Q
Input code number 06401 (0-32000)
- Press -Q- button to confirm input.
Indicated on display
Rapid data transfer HELP
Select function XX
Radio Coding (Monsoon)
- 06031 - for New Beetle USA, no passive loudspeakers, Monsoon 2-door, active antenna and no CD changer
- 06033 - for New Beetle USA, no passive loudspeakers, Monsoon 2-door, active antenna and CD changer
Indicated on display
Code Control Module Q
Input code number 06031 (0-32000)
- Press -Q- button to confirm input.
Indicated on display
Rapid data transfer HELP
Select function XX
Radio coding for all radios
End function:
- Press buttons -0- and -6- to select function 06 "End Output".
- End coding by pressing -> button.
Indicated on display
Rapid data transfer Q
06 - End Output
- Press -Q- button to confirm input.
Indicated on display
Rapid data transfer HELP
Insert address word XX
Scan tool returns to start of program sequence.