Cruise Control Switch Does Not Work
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1994 Volkswagen.
2. Turn the ignition switch, and cruise control switch on.
3. Press the resume switch.
4. If test light does not illuminate, check the following:
a. Repair broken wire.
b. Replace switch.
5. If test light illuminates, proceed as follows:
a. Connect test light between terminal No. 2 and ground.
b. Press the set switch.
c. If test light does not illuminate, repair broken wire or replace switch.
d. If test light illuminates, proceed to next test.