Repair Instruction - Initialization
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2010 Toyota.
INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION
1. PROCEDURES NECESSARY WHEN BATTERY TERMINAL IS DISCONNECTED/RECONNECTED
NOTICE:
It may not be possible to release the steering lock or start the engine when the battery voltage is low. If this occurs, initialization of the steering lock system is required. Programming and Relearning
2. PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED
* *1: w/ garage door opener system
* *2: w/ smart key system
* *3: w/o smart key system