Coolant Temperature Sensor/Switch (For Computer): Service and Repair

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1998 Subaru.

AI Repair Guides
ENGINE COOLANT TEMPERATURE SENSOR

REMOVAL AND INSTALLATION





1. Remove Air Intake Duct.





2. Disconnect connector from engine coolant temperature sensor.
3. Remove Engine coolant temperature sensor.
4. Installation is in the reverse order of removal.

Tightening Torque: 25 ± 3 N.m (18.1 ± 2.2 ft-lb).

← Back to Coolant Temperature Sensor/Switch (For Computer)All Makes