Symptoms - Object Detection: Notes

This is the exact OEM manual section for the path above. Use the breadcrumb to move up or down the tree until you reach the precise year, make, model, and subsystem you need.

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2008 Pontiac.

AI Repair Guides
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Review the system operation in order to familiarize yourself with the system functions. Refer to Object Detection Description and Operation .

Visual/Physical Inspection

  1. Inspect for aftermarket devices which could affect the operation of the system. Refer to Checking Aftermarket Accessories .
  2. Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
  3. Make sure the rear vision camera, located on the rear bumper, is clear of any obstruction. Remove any snow, mud or ice that is blocking the camera.
Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro
← Back to Symptoms - Object DetectionAll Makes

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.