Brake Rotor/Disc

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1985 Pontiac.

All rotors have a discard dimension cast into them. This is a wear dimension and not a refinish dimension. Any rotor which does not meet the specification should be replaced.

Rotor Diameter	9.72 Inch (in)
Lateral Runout	0.004 Inch (in)
Thickness Variation	0.0005 Inch (in)
Rotor Thickness (Max)	0.885 Inch (in)
Minimum Thickness after Refinish	0.83 Inch (in)
Discard Thickness	0.815 Inch (in)

← Back to Mechanical Specifications All Makes