Blower Control Module

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1998 Oldsmobile.

AI Repair Guides
The blower control module is a solid state device that operates the blower motor. The blower control module outputs a voltage that varies between 0 volts (blower motor OFF) and 12 volts (maximum blower motor speed).

To determine the appropriate output voltage, the blower control module monitors a varying voltage signal (between about two and eight volts) from the heater and A/C programmer. The module then amplifies the signal and applies voltage directly to the blower motor. Blower control module output voltage is also monitored by the heater and A/C programmer.
← Back to ControlsAll Makes