Ignition Switch: Service and Repair

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2004 Mercury.

AI Repair Guides
IGNITION SWITCH

REMOVAL AND INSTALLATION
1. Disconnect the battery.





2. Remove the lower instrument panel steering column cover.
1 Remove the screws.
2 Remove the lower instrument panel steering column cover.





3. Remove the instrument panel steering column opening cover reinforcement.
1 Remove the bolts.
2 Remove the instrument panel steering column opening cover reinforcement.





4. Remove the ignition switch.
1 Disconnect the electrical connector.
2 Remove the bolts.
5. To install, reverse the removal procedure.
← Back to Ignition SwitchAll Makes