1. Disconnect the battery negative cable.
2. Disconnect the neutral switch connector.
3. Remove the neutral switch.
4. Install the reverse order of removal.
Tightening torque: 20 - 29 N.m {2.0 - 3.0 kgf.m, 15 - 21 ft.lbf}
Transmission Position Sensor/Switch: Service and Repair
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2001 Mazda.
1. Disconnect the battery negative cable.
2. Disconnect the neutral switch connector.
3. Remove the neutral switch.
4. Install the reverse order of removal.
Tightening torque: 20 - 29 N.m {2.0 - 3.0 kgf.m, 15 - 21 ft.lbf}