1. Remove Mounting Bolt
2. Disconnect
3. Install in reverse order, noting the following:
^ Tighten mounting nut to 8.9-12.7 Nm (79-112 inch lbs.).
Electronic Brake Control Module: Service and Repair
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1997 Mazda.
1. Remove Mounting Bolt
2. Disconnect
3. Install in reverse order, noting the following:
^ Tighten mounting nut to 8.9-12.7 Nm (79-112 inch lbs.).