2. Disconnect the knock sensor connector.
3. Measure the resistance between knock sensor terminal A and the knock sensor body by using an ohmmeter.
Specification: Approx. 560 k Ohms @ 20°C (68°F)
4. If not as specified, replace the knock sensor.
Knock Sensor: Testing and Inspection
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1997 Mazda.
2. Disconnect the knock sensor connector.
3. Measure the resistance between knock sensor terminal A and the knock sensor body by using an ohmmeter.
Specification: Approx. 560 k Ohms @ 20°C (68°F)
4. If not as specified, replace the knock sensor.