1. Disconnect the power steering pressure switch connector.
2. Start the engine.
3. Check continuity of the switch by using a ohmmeter.
4. If not as specified, replace the power steering pressure switch.
Power Steering Pressure Switch: Testing and Inspection
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1997 Mazda.
1. Disconnect the power steering pressure switch connector.
2. Start the engine.
3. Check continuity of the switch by using a ohmmeter.
4. If not as specified, replace the power steering pressure switch.