POWER DISTRIBUTION: INTEGRATION RELAY: REMOVAL
1. PRECAUTION (w/ Navigation System)
NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.
2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal
4. REMOVE NO. 1 RELAY BLOCK COVER
(a) Disengage the 3 claws and remove the No. 1 relay block cover as shown in the illustration.
5. REMOVE NO. 2 INTEGRATION RELAY
(a) Disengage the 2 claws and pull up the No. 2 integration relay as shown in the illustration.
(b) Disconnect the 3 connectors and remove the No. 2 integration relay.
